How to replace your battery without damaging your phone

When you’ve already spent more than $400 on an iPhone 6s Plus, it’s easy to feel like you’ve spent more on an overpriced smartphone.

The fact that Apple is already offering a $300, free replacement for the battery in the US should tell you that there’s a lot of potential for a more sustainable way to replace the battery.

But what if your phone can be upgraded with a new battery without a whole lot of work?

Well, that’s exactly what some of Apple’s own engineers are doing.

The iPhone 6S Plus has a built-in battery that’s used to power most of its hardware.

That battery, however, is a big source of power.

It’s made up of the same battery cells as the one that powers your phone, which can be a bit tough to get used to.

If you want to use the phone as a desktop, laptop, tablet, or even a home theater, you’ll need to find a way to make the batteries last longer.

Apple has found a way.

Here’s how to upgrade your iPhone 6 or 6 Plus battery without the risk of damaging your device.

If your phone has a 4.7-inch or larger display, you can upgrade the battery’s power with a third-party battery, such as a NiMH or LiPo.

If it has a smaller display, such a 2.5-inch display, the only way to get a new one is to buy an over-the-air battery upgrade.

These batteries can be bought in any number of places, but the cheapest ones come from a company called Lithium Ion (Lithium Ion), which sells its batteries in a wide variety of configurations.

The company has already found a couple of ways to improve battery life with its battery replacement parts, but Apple’s solution for upgrading battery life is a little different.

It doesn’t need a whole bunch of specialized components, and it doesn’t require any special software to run.

Instead, it uses a hardware trick that can get the most out of a small battery: The battery is connected to a special circuit called an external charger.

This circuit has two electrodes and two terminals, which work in tandem to charge a battery.

The electrodes are the ones that the battery uses to charge the battery, and the terminals are the terminals that are used to charge your iPhone.

As you can see from the diagram above, the battery has two outputs, one for charging and one for powering the iPhone.

You can connect one of the outputs to your USB port, which is the standard for charging, and one to the charging port, where the battery will charge itself.

The battery itself is the only thing that needs to be changed, as it’s just plugged into the power source and charged.

Here are the parts you’ll have to buy to upgrade the phone’s battery.

Battery connector The battery connector that goes into the battery is called the battery connector, and this is where you’ll be buying a battery replacement.

Lithium-ion batteries have a metal plate that holds the battery cell and connects it to the wall socket, a connector that connects the battery to the power outlet.

The two terminals of the battery are on the other side of the metal plate, and they’re both held in place by two screws that attach to the plate.

You’ll also need a battery-cleaning cloth, a battery adapter, a small screwdriver, and a little bit of wire.

You don’t need to get all of this, of course, but if you have a small amount of space and you’re worried about getting something to work on the side of your house, you could buy a battery cleaning cloth or an adapter that will fit on the battery itself.

You could also buy a new charger for the iPhone, but it would probably be a little more expensive than an upgrade to an over-$400 iPhone 6 Plus.

Battery pack The battery pack that comes with your iPhone can be found under the battery section.

The lithium-ion battery in a battery pack has three separate electrodes, and two of them are connected to the battery by a wire.

One electrode is the battery voltage, which determines how much juice it can charge.

The other two electrodes are used for charging the battery—they charge the batteries when the battery isn’t charging.

A typical lithium-iron battery has a voltage of 2.2V.

A 3.5V battery has the same voltage, but has an extra charge, called an amperage.

This is how much the battery can deliver when it’s charging.

The charger is usually a large battery, so if you’re concerned about battery life, you might want to purchase a new charging pad.

The charging pad itself is made out of plastic that’s made of metal and copper.

The pads don’t actually charge a phone, but they charge a smartphone.

You plug it into your charger and it sends a signal that charges the phone.

The larger the charger, the more power it can send to the phone, so you’ll want to